EasyManuals Logo
Home>Cisco>Adapter>SPA112

Cisco SPA112 Administration Guide

Cisco SPA112
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
Administration Settings
Diagnostics
Cisco SPA100Series Administration Guide 119
5
Diagnostics
The ATA includes two built-in diagnostic tools:
Ping Test
Traceroute Test
Ping Test
Use the Administration > Diagnostics > Ping Test page to test connectivity
between the ATA and a destination.
STEP 1 Enter the IP address or domain name that you want to ping.
STEP 2 Enter a packet size in bytes. The range is 32 to 65500 bytes.
STEP 3 Choose the number of times to send the ping request (5, 10, or Unlimited).
STEP 4 Click Start to Ping to start the test. After the test is complete, the test results
appear on the page. While the ping test is running, you can click Stop to abandon
the test.
The test results indicate the number of packets sent and received, the percentage
of packet loss, and the round-trip speed.
STEP 5 Click Close to close the test results and display the Ping Test form.
Traceroute Test
Use the Administration > Diagnostics > Traceroute page to view the route
between the ATA and a destination.
STEP 1 Enter the IP address or domain name of the destination.
STEP 2 Click Start to Traceroute to start the test. The results appear on the page and are
refreshed every 5 seconds. During the test, you can click Stop to abandon the test.
The results display up to 30 hops.
STEP 3 Click Close to close the results and display the Traceroute Test form.

Table of Contents

Other manuals for Cisco SPA112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA112 and is the answer not in the manual?

Cisco SPA112 Specifications

General IconGeneral
Supported network protocolsIPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP clientYes
VPN support802.1p
Security algorithmsSSL/TLS
Authentication methodSIP
Modem (RJ-11) ports2
Ethernet LAN (RJ-45) ports1
Voice codecsG.711, G.726, G.729
CertificationFCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibilityT.38
Output current2 A
Output voltage5 V
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Width101 mm
Height28 mm
Weight153 g

Related product manuals