Cisco SPA112 Administration Guide

Configuring the Voice Settings
Regional
Cisco SPA100Series Administration Guide 66
4
CA Settings
General Purpose Parameters
Regional
Use the Voice > Regional page to localize your system with the appropriate
regional settings.
Enter the settings as described below. After making changes, click Submit to
save your settings, or click Cancel to redisplay the page with the saved settings.
Log Upgrade
Success Msg
Syslog message issued after a firmware upgrade attempt
completes successfully.
Default setting: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log Upgrade
Failure Msg
Syslog message issued after a failed firmware upgrade
attempt.
Default setting: $PN $MAC -- Upgrade failed: $ERR
License Keys This field is not currently used.
Field Description
Custom CA URL The URL of a file location for a custom Certificate
Authority (CA) certificate. Either the IP address or the
FQDN of the server can be specified. The file name can
have macros, such as $MA, which expands to the ATA
MAC address.
Default setting: null
Field Description
GPP A to GPP P General purpose provisioning parameters. These
parameters can be used as variables in provisioning and
upgrade rules. They are referenced by prepending the
variable name with a ‘$’ character, such as $GPP_A.
Default setting: blank
Field Description

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g