Cisco SPA112 Administration Guide

6
Cisco SPA100 Series Administration Guide 123
Viewing the Status and Statistics
This chapter describes how to view the status and statistics for the ATA. It includes
the following sections:
• System Information
• Interface Information
• Internet Status
• Port Statistics (SPA122 only)
• DHCP Server Information (SPA122 only)
System Information
Use the Status > System Information page to view information about the ATA and
its current settings.
Field Description
Model The model number and product description.
Hardware Version The hardware version number.
Boot Version The boot firmware version number.
Firmware Version The current firmware version.
Recovery Firmware The version number of the recovery firmware.
WAN MAC Address The MAC address of the WAN interface.
Host Name The host name of the ATA.
Domain Name The domain name of the ATA.

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g