EasyManuals Logo
Home>Cisco>Adapter>SPA112

Cisco SPA112 Administration Guide

Cisco SPA112
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide 28
3
Optional Settings
MTU The Maximum Transmission Unit (MTU) setting specifies
the largest protocol data unit (in bytes) permitted for
network transmission. Generally, a larger MTU means
greater efficiency. However, a larger packet may cause
delays for other traffic and is more likely to become
corrupted. In most cases, you should keep the default
setting, Auto, to allow the ATA to choose the appropriate
MTU. To specify the MTU, select Manual, and then enter
the number of bytes.
Field Description
Feature Description
Host Name The name of the ATA. The default value is the model
number. Your ISP may specify a host name to use.
Domain Name The domain name, if specified by your ISP. Otherwise,
leave the field blank.
DNS Server Order Choose the preferred method for choosing a DNS server.
DHCP-Manual—The DNS server settings from
the network server will take precedence, and your
entries in the DNS fields below will be used only
as a backup.
Manual-DHCPYour entries in the DNS fields
below will take precedence, and the DNS server
settings from the network server will be used as a
backup.
Manual—Your entries in the DNS fields below will
be used to choose a DNS server.
Primary DNS Enter the IP address of the primary Domain Name
Service (DNS) server to use for domain name resolution.
Keep the default entry, 0.0.0.0, to use the primary DNS
server that is specified for the WAN connection.

Table of Contents

Other manuals for Cisco SPA112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA112 and is the answer not in the manual?

Cisco SPA112 Specifications

General IconGeneral
Supported network protocolsIPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP clientYes
VPN support802.1p
Security algorithmsSSL/TLS
Authentication methodSIP
Modem (RJ-11) ports2
Ethernet LAN (RJ-45) ports1
Voice codecsG.711, G.726, G.729
CertificationFCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibilityT.38
Output current2 A
Output voltage5 V
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Width101 mm
Height28 mm
Weight153 g

Related product manuals