Cisco SPA112 Administration Guide

Configuring the Voice Settings
System
Cisco SPA100Series Administration Guide 49
4
• You can deploy a syslog server to receive syslog messages from the ATA,
which acts as a syslog client. The syslog client device uses the syslog
protocol to send messages, based on its configuration, to a syslog server.
The syslog messages can be accessed by reviewing the "syslog.514.log"
file which resides in the same directory as the slogsrv.exe syslog server
application.
• Partners can download the Syslog Server for SPA Devices by using the link
below (login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/
ps10499/syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
System Configuration
Miscellaneous Settings
Field Description
Restricted Access
Domains
This feature is not currently used.
IVR Admin
Password
Password for the administrator to manage the ATA by
using the built-in IVR through a connected phone.
Network Startup
Delay
The number of seconds of delay between restarting the
voice module and initializing network interface.
Default setting: 3
Field Description
DNS Query TTL
Ignore
In DNS packages, the server will suggest a TTL value to
the client; if this parameter is set to yes, the value from the
server will be ignored.
Default setting: yes
Syslog Server Specify the syslog server name and port. This feature
specifies the server for logging ATA system information
and critical events. If both Debug Server and Syslog
Server are specified, Syslog messages are also logged to
the Debug Server.
Default setting: blank

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g