D-Link DSL-226 User Manual

33D-Link DSL-226 User Manual
Section 4 - Conguration
Internet - VDSL
VDSL is one of the latest and fastest home broadband technologies. VDSL
uses the DSL port on your DSL-226 to connect to the Internet. In order for your
DSL-226 to use VDSL, you must congure the WAN Connection Type and
related WAN settings.
Congure your
WAN connection:
Select VDSL to congure VDSL connection settings.
If you click on Advanced Settings, the following WAN Settings are available:
VDSL VC Settings
Service Number:
Select a service number for setting VDSL virtual circuit. The system
supports up to 8 VCs.
Enable Virtual
Circuit:
Enable or disable virtual circuit conguration.
VLAN Settings
Enable VLAN ID:
Enable or disable VLAN settings.
VLAN ID:
Enter the VLAN ID. Enter a value from 1 - 4094.
To set your IPv4/IPv6 connection parameters of WAN connection, refer to
Connection Types on page 35.

D-Link DSL-226 Specifications

General

Brand	D-Link
Model	DSL-226
Category	Network Router
Language	English