D-Link DSL-226 User Manual

44D-Link DSL-226 User Manual
Section 4 - Conguration
VPN
A Virtual Private Network (VPN) is used to establish a virtual, encrypted
connection over an existing network utilizing tunneling protocol such as PPTP
or L2TP. To access this page, go to Settings > VPN.
Congure the following to set up a VPN connection to a VPN server:
VPN Settings
VPN:
Select Point-to-Point Tunneling Protocol (PPTP) or Layer 2
Tunneling Protocol (L2TP).
Server Address:
Enter the PPTP or L2TP server address.
Username:
Enter the username for connection authentication.
Password:
Enter the password for connection authentication.
VPN is Used:
Select to the Internet if the VPN is created for connecting to the
Internet for all trac through the WAN interface or to the virtual
private network if the VPN is created to facilitate encapsulated and
encrypted connections to another network across an existing Internet
connection.
Note: It is required that you have congured WAN settings (go to Settings > Internet)
before creating a VPN connection.
Click Save when you are done.

D-Link DSL-226 Specifications

General

Brand	D-Link
Model	DSL-226
Category	Network Router
Language	English