D-Link DSL-G225 User Manual

45D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
Section 4 - Conguration
IPv6 Local Network
This section enables you to specify various IPv6 settings.
Interface Address: Use this option to specify a static IPv6 Address.
STATIC LAN IPV6 ADDRESS CONFIGURATION
Enable RADVD: Enable or disable the Router Advertisement Daemon.
Enable ULA Prefix
Advertisement
Select whether to enable ULA Prex advertisement. If selected, choose
to either Randomly Generate the ULA Prex or Statically Congure
the ULA Prex by inputting the Prex, Preferred Life Time in hours,
and Valid Life Time in hours.
Enable MLD
Snooping
Select to enable Multicast Listener Discovery.
Click Save/Apply when you are done.
SITE PREFIX CONFIGURATION
Enable DHCPv6
Server:
Enable or disable the DHCPv6 server function.
LAN Address
Config Mode:
Select either stateless (host requests) or stateful (server provisions)
LAN IPv6 addressing.
Start/End
Interface ID:
Enter the range of IP addresses the DHCPv6 server can issue from.
Leased Time: The lease time determines the period that the host retains the
assigned IP addresses before the IP addresses change.
STATIC LAN IPV6 ADDRESS CONFIGURATION

D-Link DSL-G225 Specifications

Power

input voltage	100~240 V
input frequency	50~60 Hz
output voltage	DC 12 V

Operating Environment

operating temperature	0 to 40 °C
non-operating temperature	-20 to 65 °C
operating humidity	0% - 90% non-condensing

Weight and Dimensions

dimensions	131.5 x 74.3 x 185.4 mm
weight	285 grams