D-Link DSL-G225 User Manual

93D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
Section 4 - Conguration
Firmware Update
Current Firmware
Version:
Displays your current firmware’s version.
Current Firmware
Date:
Displays your current rmware’s release date.
Firmware File
Name:
After you have downloaded a new rmware, click Browse... and
locate the rmware on your computer. To begin the rmware update
process, click Update Firmware. The update process takes about two
minutes to complete.
Warning: You must use a computer with a wired connection to the
device to upload the rmware le; do not use a wireless client. During
the upgrade process, do not power o your computer or router, and
do not refresh the browser window until the upgrade is complete.
FIRMWARE UPDATE
This page allows you to upgrade the rmware of your router. Make sure the rmware you want to use is on the local hard drive
of the computer and then click Browse to upload the le.

D-Link DSL-G225 Specifications

Power

input voltage	100~240 V
input frequency	50~60 Hz
output voltage	DC 12 V

Operating Environment

operating temperature	0 to 40 °C
non-operating temperature	-20 to 65 °C
operating humidity	0% - 90% non-condensing

Weight and Dimensions

dimensions	131.5 x 74.3 x 185.4 mm
weight	285 grams