D-Link DSL-G225 User Manual

65D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
Section 4 - Conguration
Bridge Filtering
Bridge Filtering only eects ATM PVCs congured for Bridge mode. ALLOW means that all
MAC layer frames will be ALLOWED except those matching with any of the specied rules
in the following table. DENY means that all MAC layer frames will be DENIED except those
matching with any of the specied rules in the following table.
Set the Bridge Filtering Global Policy to either ALLOW or DENY the following rules. Click
Apply after changing the setting.
Enter the Bridge Filter rules.
ADD BRIDGE FILTER
The current active bridge lters will be listed here.
Click Add to add a new rule to the bridge lter list.
BRIDGE FILTER SETUP
Click Apply when you are done.

D-Link DSL-G225 Specifications

Power

input voltage	100~240 V
input frequency	50~60 Hz
output voltage	DC 12 V

Operating Environment

operating temperature	0 to 40 °C
non-operating temperature	-20 to 65 °C
operating humidity	0% - 90% non-condensing

Weight and Dimensions

dimensions	131.5 x 74.3 x 185.4 mm
weight	285 grams