D-Link DSL-G225 User Manual

51D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
Section 4 - Conguration
Advanced Settings
Multicast
Rate:
Auto is the default and recommended setting.
Fragmentation
Threshold:
2346 is the default and recommended setting. Packets exceeding this
threshold, in bytes, will be fragmented before transmission.
Advanced users may wish to adjust this value to improve performance in
the presence of radio frequency (RF) interference.
RTS
Threshold:
2347 is the default and recommended setting. Advanced users may wish
to make minor adjustments if data flow problems exist.
DTIM
Interval:
1 is the default and recommended setting. Delivery traffic indication
messages inform wireless clients of how often to listen for buered multicast
or broadcast data.
Beacon
Interval:
100 is the default and recommended setting. Specify a value for the
beacon interval. Beacons are packets sent to synchronize a wireless
network.
Global
Max Clients:
16 is the default and recommended setting. Specify the maximum
number of wireless clients allowed to connect.
Transmit
Power:
100% is the default and recommended setting. You may set the transmit
power from 20-100% in 20% increments.
WMM(Wi-Fi
Multimedia):
WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for
improving the quality of video and voice applications on your wireless
network. Enable is the default and recommended setting.
ADVANCED WIRELESS SETTINGS

D-Link DSL-G225 Specifications

Power

input voltage	100~240 V
input frequency	50~60 Hz
output voltage	DC 12 V

Operating Environment

operating temperature	0 to 40 °C
non-operating temperature	-20 to 65 °C
operating humidity	0% - 90% non-condensing

Weight and Dimensions

dimensions	131.5 x 74.3 x 185.4 mm
weight	285 grams