xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
259
16-23 show cfm mipccm
Description
This command is used to display the MIP CCM database entries. All entries in the MIP CCM
database will be displayed. An MIP CCM entry is similar to an FDB which keeps the forwarding
port information of a MAC entry.
Format
show cfm mipccm
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
To display the MIP CCM database entries:
DGS-3620-28SC:admin#show cfm mipccm
Command: show cfm mipccm
MA VID MAC Address Port
------------------------ ---- -------------------- -------
opma 1 XX-XX-XX-XX-XX-XX-XX 2
opma 1 XX-XX-XX-XX-XX-XX-XX 3
Total: 2
16-24 show cfm mp_ltr_all
Description
This command is used to display the current configuration of the "all MPs reply LTRs" function.
This command is for test purposes.
Format
show cfm mp_ltr_all
Parameters
None.
To Next Page
Loading...
Need help?
General