D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
79
add - Add a server host to the server group.
delete - Remove a server host to the server group.
server_host - Specifies the server host.
<ipaddr> - Enter the IP address of the server host.
protocol - Specifies the server host protocol.
tacacs - Specifies the server host using TACACS protocol.
xtacacs - Specifies the server host using XTACACS protocol.
tacacs+ - Specifies the server host using TACACS+ protocol.
radius - Specifies the server host using RADIUS protocol.
Restrictions
Only Administrator level can issue this command.
Example
To To add an AAA server host with an IP address of 10.1.1.222 to server group “mix_1”, specifying
the TACACS+ protocol:
DGS-3620-28SC:admin#config aaa server_group group_name mix_1 add server_host
10.1.1.222 protocol tacacs+
Command: config aaa server_group group_name mix_1 add server_host 10.1.1.222
protocol tacacs+
Success.
DGS-3620-28SC:admin#
4-31 delete aaa server_group
Description
This command is used to delete a group of user-defined AAA servers.
Format
delete aaa server_group <string 15>
Parameters
<string 15> - Enter the server group name to be deleted.
Restrictions
Only Administrator level can issue this command.
Example
To delete a user-defined AAA server group called “mix_1”:

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English