xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
792
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP:
70-2 disable snmp
Description
This command is used to disable the SNMP function. When SNMP function is disabled, the
network manager will not be able to access SNMP MIB objects. The device will not send traps or
notification to network manager either.
Format
disable snmp
Parameters
None. By default, SNMP is disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP:
To Next Page
Loading...
Need help?
General