D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
314
Format
debug stp show flag {ports <portlist>}
Parameters
ports - (Optional) Specifies the STP ports to display.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If no parameter is specified, all ports on the switch will be displayed.
Restrictions
Only Administrator level users can issue this command.
Example
To display the debug STP levels on all ports:
DGS-3620-28SC:admin# debug stp show flag
Command: debug stp show flag
Global State: Enabled
Port Index Event flag BPDU Flag State Machine Flag
---------- ---------- --------- ------------------
1 Detail Brief Disable
2 Detail Brief Disable
3 Detail Brief Disable
4 Detail Brief Disable
5 Detail Brief Disable
6 Detail Brief Disable
7 Detail Brief Disable
8 Detail Brief Disable
9 Detail Brief Disable
10 Detail Brief Disable
11 Detail Brief Disable
12 Detail Brief Disable
DGS-3620-28SC:admin#
21-13 debug stp show information
Description
This command used to display STP detailed information, such as the hardware tables, the STP
state machine, etc.
Format
debug stp show information

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English