xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
46
<int 1-20> - The re-transmit value must be between 1 and 20.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a new RADIUS server:
DGS-3620-28SC:admin#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
3-21 config radius delete
Description
This command is used to delete a RADIUS server.
Format
config radius delete <server_index 1-3>
Parameters
<server_index 1-3> - Enter the RADIUS server index. The range is from 1 to 3.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a RADIUS server:
DGS-3620-28SC:admin#config radius delete 1
Command: config radius delete 1
Success.
3-22 config radius
Description
This command is used to configure a RADIUS server.
To Next Page
Loading...
Need help?
General