xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
454
DGS-3620-28SC:admin# show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface Neighbor Address Generation ID Expire Time
--------------- ---------------- ------------- -----------
System 10.48.74.123 86 32
Total Entries : 1
28-6 show dvmrp nexthop
Description
This command is used to display the DVMRP routing next hop table.
Format
show dvmrp nexthop {ipaddress <network_address> | ipif <ipif_name 12>}
Parameters
ipaddress - (Optional) Specifies the IP address and netmask of the destination used.
<network_address> - Enter the IP address and netmask of the destination used here.
ipif - (Optional) Specifies the IP interface name used for the display.
<ipif_name 12> - Enter the IP interface name used for the display here. This name can be up
If no parameter is specified, the system will display all the DVMRP routing next hop tables.
Restrictions
None. (EI Mode Only Command)
Example
To display DVMRP routing next hop table:
To Next Page
Loading...
Need help?
General