D-Link xStack - Page 805

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
800
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3620-28SC:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3620-28SC:admin#
70-14 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP authentication trap support:
DGS-3620-28SC:admin#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3620-28SC:admin#
70-15 enable snmp linkchange_traps
Description
This command is used to enable SNMP linkchange trap support.
Format
enable snmp linkchange_traps