xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
86
4-40 config accounting service command
Description
This command is used to configure the state of the specified accounting service.
Format
config accounting service command {administrator | operator | power_user | user}
[method_list_name <string> | none]
Parameters
administrator - (Optional) Specifies the accounting service for all administrator level commands.
operator - (Optional) Specifies the accounting service for all operator level commands.
power_user - (Optional) Specifies the accounting service for all power-user level commands.
user - (Optional) Specifies the accounting service for all user level commands.
method_list_name - Specifies the accounting service by the AAA user-defined method list.
<string> - Enter the method list name used here.
none - Specifies to disable accounting services for the specified command level.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the AAA accounting methodlist “admin_acct” for accounting to all administrator
commands:
DGS-3620-28SC:admin#config accounting service command administrator
method_list_name admin_acct
Command: config accounting service command administrator method_list_name
admin_acct
Success.
4-41 create accounting method_list_name
Description
This command is used to create a user-defined method list of accounting methods.
Format
create accounting method_list_name <string 15>
Parameters
<string 15> - Enter the name of the user-defined method list here. This name can be up to 15
characters long.
To Next Page
Loading...
Need help?
General