Dahua NVR6000 Series User Manual

3.14.4 Update
From Mani menu->Setting->Info->Update, you can go to the following interface. See Figure 3-140.
a) Insert USB device that contain the upgrade file.
b) Click Start button and then select the .bin file.
c) You can see the corresponding dialogue box after the update process is complete.
Figure 3-140
3.14.5 Default
You can restore factory default setup to fix some problems when the device is running slowly.
Configuration error occurred.
From Main menu->Setting->System->Default, you can go to the default interface. See Figure 3-141.
Click default icon, system pops up a dialogue box. You can highlight
to restore factory default setup.
 All
 Camera
 Network
 Event
 Storage
 System
Please highlight icon
to select the corresponding function.
After all the setups please click OK button, system goes back to the previous menu.
Warning!
After you use default function, some your customized setup may lose forever! Please think twice before
you begin the operation!
133

Dahua NVR6000 Series Specifications

General

Brand	Dahua
Model	NVR6000 Series
Category	Network Hardware
Language	English