Click the , you can go to the smart search playback. Click it again, system stops smart search
playback.
Important
System does not support motion detect zone setup during the full-screen mode.
During the multiple-channel playback, system stops playback of rest channels if you
implement one-channel smart search.
3.8.5 Mark Playback
Please make sure your purchased device support this function. You can use this function only if
you can see the mark playback icon on the Search interface (Figure 3-63).
When you are playback record, you can mark the record when there is important information. After
playback, you can use time or the mark key words to search corresponding record and then play. It is very
easy for you to get the important video information.
Add Mark
When system is playback, click Mark button
, you can go to the following interface. See Figure 3-66.
Figure 3-66
Playback Mark
During 1-window playback mode, click mark file list button
in Figure 3-63, you can go to mark file list
interface. Double click one mark file, you can begin playback from the mark time.
Play before mark time
Here you can set to begin playback from previous N seconds of the mark time.
Note
Usually, system can playbacks previous N seconds record if there is such kind of record file. Otherwise,
system playbacks from the previous X seconds when there is such as kind of record.
Mark Manager
manager button
on
Click the mark
the Search interface (Figure 3-63); you
can go to Mark Manager interface. See Figure
3-67. System can manage all the record mark
information of current channel by default. You
can view all mark information of current channel
by time.
76
To Next Page
Loading...
Need help?
General
