EasyManuals Logo
Home>Dahua>Network Hardware>NVR6000 Series

Dahua NVR6000 Series User Manual

Dahua NVR6000 Series
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
service, device supports the server address of IPv4 or domain.
Please follow the steps listed below to use this function.
Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto
register function, the device can auto register to the proxy server.
Figure 4-37
4.8.2.12 Alarm Centre
From main window->Setup->Network->Alarm centre, the alarm center interface is shown as below. See
Figure 4-38.
This interface is reserved for you to develop. System can upload alarm signal to the alarm center when
local alarm occurs.
Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send
out data as the protocol defined, so the client-end can get the data.
Figure 4-38
4.8.2.13 HTTPS
From main window->Setup->Network->HTTPS, you can see an interface shown as in Figure 4-39. In this
interface, you can set to make sure the PC can successfully login via the HTTPS. It is to guarantee
164

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua NVR6000 Series and is the answer not in the manual?

Dahua NVR6000 Series Specifications

General IconGeneral
BrandDahua
ModelNVR6000 Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals