Dahua NVR6000 Series User Manual

Select one monitor channel video and then click Image button in section 9, the interface is shown as
Figure 4-12.
4.5.1 Image
Here you can adjust its brightness, contrast, hue and saturation. (Current channel border becomes
green).
Or you can click Reset button to restore system default setup.
Figure 4-12
4.5.2 Alarm output
Here you can enable or disable the alarm signal of the corresponding port. See Figure 4-13.
Figure 4-13
4.6 Zero-channel Encode
Select a window and then click zero-channel encode button, the interface is shown as below. See Figure
4-14.
Figure 4-14
142

Dahua NVR6000 Series Specifications

General

Brand	Dahua
Model	NVR6000 Series
Category	Network Hardware
Language	English