Dahua NVR6000 Series User Manual

After you logged in the device, right click mouse, you can see the short cut menu. Please see Figure
3-26.
 Window split mode: You can select window amount and then select channels.
 PTZ: Click it to go to PTZ interface.
 Auto focus: It is to set auto focus function. Please make sure the connected network camera
supports this function.
 Image: Set video corresponding information.
 Search: Click it to go to Search interface to search and playback a record file.
 Record control: Enable/disable record channel.
 Alarm output: It is to set alarm output mode.
 Remote: Search and add a remote device.
 Alarm output: Generate alarm output signal manually.
 Main menu: Go to system main menu interface.
Tips:
Right click mouse to go back to the previous interface.
Figure 3-26
3.5.4 Preview Display Effect Setup
3.5.4.1 Display
From Main Menu->Setting->System->Display, you can go to the following interface. See Figure 3-27.
Here you can set menu and video preview effect. All you operation here does not affect the record file and
playback effect.
47

Dahua NVR6000 Series Specifications

General

Brand	Dahua
Model	NVR6000 Series
Category	Network Hardware
Language	English