EasyManuals Logo
Home>Danfoss>DC Drives>VLT FC 102 N250

Danfoss VLT FC 102 N250 User Manual

Danfoss VLT FC 102 N250
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #148 background imageLoading...
Page #148 background image
Torque rise time in VVC
+
(independent of f
sw
)
10 ms
1
Percentage relates to the nominal torque.
10.4 Ambient Conditions
Enclosure
IP21/NEMA 1, IP54/NEMA 12
Vibration test
1.0 g
Maximum THDv
10%
Maximum relative humidity
5–93 (IEC 721-3-3); Class 3K3 (non-condensing) during operation
Aggressive environment (IEC 60068-2-43) H
2
S test
Class Kd
Ambient temperature
Maximum 50° C (122° F) (24-hour average maximum 45 °C (113
°F))
(1)
Minimum ambient temperature during full-scale operation
0 °C (32 °F)
(1)
Minimum ambient temperature at reduced speed performance
-10 °C (14 °F)
(1)
Temperature during storage/transport
-25 to +65/70 °C (-13 to +149/158 °F)
Maximum altitude above sea level without derating
1000 m (3280 ft)
EMC standards, Emission
EN 61800-3
EMC standards, Immunity
EN 61800-3
Energy eciency class
(2)
IE2
1
For more information on derating, refer to the product-specic Design Guide.
2
Determined according to IEC 61800-9-2 at:
Rated load.
90% rated frequency.
Switching frequency factory setting.
Switching pattern factory setting.
10.5 Motor and Control Cables
Maximum motor cable length, shielded
150 m (492 ft)
Maximum motor cable length, unshielded
300 m (984 ft)
Maximum cross-section to control terminals, exible/rigid wire
without cable end sleeves
1.5 mm
2
/16 AWG
Maximum cross-section to control terminals, exible wire with ca-
ble end sleeves
1 mm
2
/18 AWG
Maximum cross-section to control terminals, exible wire with ca-
ble end sleeves with collar
0.5 mm
2
/20 AWG
Minimum cross-section to control terminals
0.25 mm
2
/24 AWG
For power cables, see the Electrical Data section.
10.6 Control Input/Output and Control Data
10.6.1 Control Card, USB Serial Communication
USB standard
1.1 (full speed)
USB plug
(1)
USB type B plug
1
Connection to the PC is carried out via a standard host/device USB cable.
AQ357954340588en-000201 / 130R0881148 | Danfoss A/S © 2020.09
Specications
VLT® Refrigeration Drive FC 103
Operating Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss VLT FC 102 N250 and is the answer not in the manual?

Danfoss VLT FC 102 N250 Specifications

General IconGeneral
BrandDanfoss
ModelVLT FC 102 N250
CategoryDC Drives
LanguageEnglish

Related product manuals