Danfoss VLT FC 302 User Manual

6.3.10 8-** Comm. and Options
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
8-0* General Settings
8-01 Control site
[0] Digital and
ctrl.word All set-ups TRUE - Uint8
8-02 Control word source null All set-ups TRUE - Uint8
8-03 Control word timeout time 1.0 s 1 set-up TRUE -1 Uint32
8-04 Control word timeout function null 1 set-up TRUE - Uint8
8-05 End-of-timeout function [1] Resume set-up 1 set-up TRUE - Uint8
8-06 Reset control word timeout [0] Do not reset All set-ups TRUE - Uint8
8-07 Diagnosis trigger [0] Disable 2 set-ups TRUE - Uint8
8-08 Readout filtering null All set-ups TRUE - Uint8
8-1* Ctrl. Word Settings
8-10 Control word profile [0] FC profile All set-ups TRUE - Uint8
8-13 Configurable status word STW null All set-ups TRUE - Uint8
8-14 Configurable control word CTW [1] Profile default All set-ups TRUE - Uint8
8-3* FC Port Settings
8-30 Protocol [0] FC 1 set-up TRUE - Uint8
8-31 Address 1 N/A 1 set-up TRUE 0 Uint8
8-32 FC port baud rate null 1 set-up TRUE - Uint8
8-33 Parity/stop bits
[0] Even Parity, 1 Stop
Bit 1 set-up TRUE - Uint8
8-34 Estimated cycle time 0 ms 2 set-ups TRUE -3 Uint32
8-35 Minimum response delay 10 ms All set-ups TRUE -3 Uint16
8-36 Max response delay App.Dependent 1 set-up TRUE -3 Uint16
8-37 Max inter-char delay App.Dependent 1 set-up TRUE -5 Uint16
8-4* FC MC protocol set
8-40 Telegram selection
[1] Standard telegram
1 2 set-ups TRUE - Uint8
8-41 Parameters for signals 0 All set-ups FALSE - Uint16
8-42 PCD write configuration App.Dependent All set-ups TRUE - Uint16
8-43 PCD read configuration App.Dependent All set-ups TRUE - Uint16
8-5* Digital/Bus
8-50 Coasting select [3] Logic OR All set-ups TRUE - Uint8
8-51 Quick stop select [3] Logic OR All set-ups TRUE - Uint8
8-52 DC brake select [3] Logic OR All set-ups TRUE - Uint8
8-53 Start select [3] Logic OR All set-ups TRUE - Uint8
8-54 Reversing select [3] Logic OR All set-ups TRUE - Uint8
8-55 Set-up select [3] Logic OR All set-ups TRUE - Uint8
8-56 Preset reference select [3] Logic OR All set-ups TRUE - Uint8
8-57 Profidrive OFF2 select [3] Logic OR All set-ups TRUE - Uint8
8-58 Profidrive OFF3 select [3] Logic OR All set-ups TRUE - Uint8
8-8* FC Port Diagnostics
8-80 Bus message count 0 N/A All set-ups TRUE 0 Uint32
8-81 Bus error count 0 N/A All set-ups TRUE 0 Uint32
8-82 Slave messages rcvd 0 N/A All set-ups TRUE 0 Uint32
8-83 Slave error count 0 N/A All set-ups TRUE 0 Uint32
8-9* Bus Jog
8-90 Bus jog 1 speed 100 RPM All set-ups TRUE 67 Uint16
8-91 Bus jog 2 speed App.Dependent All set-ups TRUE 67 Uint16
Programming Operating Instructions
86 Danfoss A/S © Rev. 2014-07-29 All rights reserved. MG37A202
66

Danfoss VLT FC 302 Specifications

General

Brand	Danfoss
Model	VLT FC 302
Category	Controller
Language	English