Danfoss VLT FC 302 User Manual

6.3.17 16-** Data Readouts
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
16-0* General Status
16-00 Control word 0 N/A All set-ups FALSE 0 V2
16-01 Reference [unit]
0.000 ReferenceFeed-
backUnit All set-ups FALSE -3 Int32
16-02 Reference % 0.0 % All set-ups FALSE -1 Int16
16-03 Status word 0 N/A All set-ups FALSE 0 V2
16-05 Main actual value [%] 0.00 % All set-ups FALSE -2 N2
16-09 Custom readout 0.00 CustomReadoutUnit All set-ups FALSE -2 Int32
16-1* Motor Status
16-10 Power [kW] 0.00 kW All set-ups FALSE 1 Int32
16-11 Power [hp] 0.00 hp All set-ups FALSE -2 Int32
16-12 Motor voltage 0.0 V All set-ups FALSE -1 Uint16
16-13 Frequency 0.0 Hz All set-ups FALSE -1 Uint16
16-14 Motor current 0.00 A All set-ups FALSE -2 Int32
16-15 Frequency [%] 0.00 % All set-ups FALSE -2 N2
16-16 Torque [Nm] 0.0 Nm All set-ups FALSE -1 Int16
16-17 Speed [RPM] 0 RPM All set-ups FALSE 67 Int32
16-18 Motor thermal 0 % All set-ups FALSE 0 Uint8
16-19 KTY sensor temperature 0 °C All set-ups FALSE 100 Int16
16-20 Motor angle 0 N/A All set-ups TRUE 0 Uint16
16-21 Torque [%] high res. 0.0 % All set-ups FALSE -1 Int16
16-22 Torque [%] 0 % All set-ups FALSE 0 Int16
16-25 Torque [Nm] high 0.0 Nm All set-ups FALSE -1 Int32
16-3* Drive Status
16-30 DC link voltage 0 V All set-ups FALSE 0 Uint16
16-32 Brake energy/s 0.000 kW All set-ups FALSE 0 Uint32
16-33 Brake energy/2 min 0.000 kW All set-ups FALSE 0 Uint32
16-34 Heatsink temp. 0 °C All set-ups FALSE 100 Uint8
16-35 Inverter thermal 0 % All set-ups FALSE 0 Uint8
16-36 Inv. nom. current App.Dependent All set-ups FALSE -2 Uint32
16-37 Inv. max. current App.Dependent All set-ups FALSE -2 Uint32
16-38 SL controller state 0 N/A All set-ups FALSE 0 Uint8
16-39 Control card temp. 0 °C All set-ups FALSE 100 Uint8
16-40 Logging buffer full [0] No All set-ups TRUE - Uint8
16-41 LCP bottom statusline 0 N/A All set-ups TRUE 0 VisStr[50]
16-49 Current fault source 0 N/A All set-ups x TRUE 0 Uint8
16-5* Ref. & Feedb.
16-50 External reference 0.0 N/A All set-ups FALSE -1 Int16
16-51 Pulse reference 0.0 N/A All set-ups FALSE -1 Int16
16-52 Feedback [unit]
0.000 ReferenceFeed-
backUnit All set-ups FALSE -3 Int32
16-53 Digi pot reference 0.00 N/A All set-ups FALSE -2 Int16
16-57 Feedback [RPM] 0 RPM All set-ups FALSE 67 Int32
Programming Operating Instructions
96 Danfoss A/S © Rev. 2014-07-29 All rights reserved. MG37A202
66

Danfoss VLT FC 302 Specifications

General

Brand	Danfoss
Model	VLT FC 302
Category	Controller
Language	English