To Next Page

To Previous Page

70 Printer Manager

• Color—PrintthetestcardusingtheYMCKpanelsoftheprintribbononthe

frontorback.

• Monochrome—Printthetestcardusingamonochromeribbon(ortheK

panelofacolorribbon)onthefrontorback.

• Topcoat—Printthetestcardwithtopcoatonthefrontorback.

• SecondTopcoat—Printthetestcardwithasecondtopcoatonthefrontor

back.

• TestPatterntouseforColorand/orMonochrome—Selectthetypeoftest

patterntouseonthefrontorbackofthetestcard.Youcanselectfromthe

following:

• TestPattern1—Usethistesttoevaluatetheoverallprintqualityofthe

card.Thetestprintsafull‐colortestcardusingtheYMCKpanelsofthe

printribbon.

• TestPattern2—Usethistesttoevaluatetheoverallprintqualitywhen

usingshort‐panelprintribbon.

• TestPattern3—Usethistesttoidentifyprintintensityissuesthatcan

appearaswrinklesontheprintedcard.Theoptionprintsadenseblue

colorcardtotestthedensityoftheprintedcard.

• TestPattern4—Usethistesttoprintacolor‐steptestcardthatusesall

panelsoftheprintribbonanddisplaysthestepsofeachcolorfrom

darke s ttolightest.

• TestPattern5—Usethistesttosetupthecardregistrationoftheprinter.

Printthecardtoverifychangestothecardregistrationsettings.

• TestPattern6—Usethistesttoprintamarbles‐imagetestcardtoevaluate

generalappearance.

• TestPatternRegistrationandTestPatternCheckered—Usetheseteststo

checkcardregistrationmechanically.Side/sideorlead/trailingissuesmay

indicateachassis,cardguide,orrollerproblem.

• TestPatternShort—Usethistesttoprintashort‐panelYMCKTtestcard.

• TestPatternGrid—UsethistesttoprintafullKpaneltestcard.

• TestPatternManufactureA–E—Thesetestcardsareusedonlyduring

manufacturingsetup.

DataCard SD260LTM Installation And Administration Guide

Other manuals for DataCard SD260LTM