2 PowerScan
®
RF Scanner
Product
Description
The PowerScan
®
RF scanner is designed for durability, with high
impact-resistant material and protective rubber cushioning at every
point of impact, and it also provides the unleashed freedom of Radio
Frequency (RF) communication with your host system. Scanner and
Base Station nomenclature and labeling are shown in Figure 1 and
Figure 2 below.
Figure 1. Scanner Labels and Nomenclature
1. Trigger 4. Tether Hook
2. Scan Window 5. Yellow LED
3. Green LED 6. Battery
NOTE
Figure 1 and Figure 2 show label placement ONLY.
For actual regulatory, patent and other applicable
information, view the labels on the product itself, or
call your nearest sales or service representative.
CAUTION—LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.
COVERED
BY ONE OR MORE OF THE
FOLLOWING PATENTS:
4,387,297 • 4,409,470 • 4,460,120
4,593,18 6 • 4,652,750 • 4,673,8 05
4,736,095 • 4,816,660 • 4,8 45,350
4,861,972 • 4,8 66,257 • 4,879,456
5,179,270 • 5,180,904 • 5,23 7,161
5,247,161 • 5,247,162 • 5,258,604
5,260,554 • 5,298,728 • 5,311,000
5,330,370 • 5,468 ,949 • 5,475,206
5,481,098
Other patents pending
MODEL:
CLASS No.
SERIAL No.
MFG. DATE:
FREQ:
LASER RADIATION-DO NOT STARE INTO BEAM
1mw - 650-685nm CLASS 2 LASER PRODUCT
Based on 100 sec., EN60825-1/A11:1996
ACN
073200496
XXXXX
CUS
LISTED
NWGQ 2Z78
Complies with 21CFR 1040 and part 15 of
FCC Rules. Applicable patents are listed
on label inside unit.
RF
1
2
3
4
6
5
To Next Page
Loading...
Need help?
General
