Systems Manual 73
Maintenance and Troubleshooting
Scanner
Maintenance
The scan window will require occasional cleaning to remove smudges,
dust and other debris. To ensure optimal performance, clean the Scan
Window using a soft cloth or lens tissue dampened with isopropyl
alcohol (or equivalent). See Figure 17. The scanner body can also be
cleaned using this method.
Figure 17. Cleaning the Scan Window
Base Station
Maintenance
The Base Station requires no routine maintenance. If the antenna
becomes damaged, a kit is available for its replacement. Use only Data-
logic replacement antenna kits, since use of other antennas can
adversely affect performance. Repair or replacement of other items
such as charging contact pins, internal components, etc. must be per-
formed by an authorized repair center.
Four Station
Charger
Maintenance
Four Station Charger battery contact replacement kits are available. See
the section, References, for information about attaining replacement kits.
To Next Page
Loading...
Need help?
General
