System
Settings
Power Saver
Time-Sleep
Displays the time for transition to the power saver mode (Sleep).
Power Saver
Time-Deep
Sleep
Displays the time for transition to the power saver mode (Deep Sleep).
Control Panel
Tone
Displays whether to emit the tone when the operator panel input is correct. Off
indicates that the tone is disabled.
Invalid Key
Tone
Displays whether to emit the tone when the operator panel input is incorrect. Off
indicates that the tone is disabled.
Machine Ready
Tone
Displays whether to emit the tone when the printer becomes ready. Off indicates
that the tone is disabled.
Job Completed
Tone
Displays whether to emit the tone when a print job is complete. Off indicates that
the tone is disabled.
Fault Tone
Displays whether to emit the tone when a job ends abnormally. Off indicates that
the tone is disabled.
Alert Tone
Displays whether to emit the tone when a problem occurs. Off indicates that the
tone is disabled.
Out of Paper
Alert Tone
Displays whether to emit the tone when the printer runs out of paper. Off indicates
that the tone is disabled.
Low Toner
Alert Tone
Displays whether to emit the tone when toner or some other consumable is low. Off
indicates that the tone is disabled.
Base Tone
Displays whether to emit the tone when the operator panel screen is returned to
the default by scrolling the loop menu. Off indicates that the tone is disabled.
Fault Time-Out Displays the amount of time the printer cancels for a job stops abnormally.
Job Time-Out Displays the amount of time the printer waits for data to arrive from the computer.
Panel
Language
Displays the language used on the operator panel screen.
Auto Log Print Displays whether to automatically output a log of completed jobs.
Print ID Displays where to print a user ID on the output paper.
Print Text
Displays whether the printer outputs PDL (Page Description Language) data, which
is not supported by the printer, as text when the printer receives it.
Banner Sheet
Insert Position
Displays where to insert a banner sheet.
Banner Sheet
Specify Tray
Displays which input tray to use to insert a banner sheet.
RAM Disk*
1
Displays the amount of memory allocated for the file system, Secure Print and Proof
Print features.
Substitute Tray
Displays whether to use another size paper when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
mm / inch Displays the measurement unit used on the operator panel screen.
Letterhead
Duplex Mode
Displays whether to duplex print for letter head paper.
Low Toner
Alert Msg
Displays whether to show the message when the toner is short.
Job Offset*
2
Displays whether to offset the position of the output paper.
Banner Sheet
Offset*
2
Displays whether to insert the banner sheet per offset output paper.
Job Offset of
Staple*
2
Displays whether to staple per offset output paper.
Stapler Cart.
Empty*
2
Displays whether to continue the print job when the stapler cartridge is empty.
Parallel Port Displays whether the parallel interface is enabled.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
