The Printer Settings page is printed.
6. Verify that the Network (Wireless) section exists.
NOTE: For more information on configuring the Wireless Adapter see "Configuring a Wireless Adapter."
Determining the Wireless Network Settings
You need to know the wireless network settings to use your printer as a wireless device. For details of the settings,
contact your network administrator.
Wireless
Settings
SSID Specifies the name that identifies the wireless network. Up to 32
alphanumeric characters.
Network
Type
Specifies the network type from Ad-hoc or Infrastructure.
Security
Settings
Security Selects the security method from No security, WEP, WPA-PSK TKIP and
WPA2-PSK-AES/WPA-PSK-AES.
Transmit
Key
Specifies the transmit key from the list.
WEP Key Specified the WEP key set used through the wireless network only when
WEP is selected for Security.
Pass
Phrase
Specifies the pass phrase of alphanumeric characters from 8 to 63 bytes
long only when WPA-PSK is selected for Encryption.
Configuring a Wireless Adapter
This section describes how to configure a wireless adapter through Easy Setup Navigator.
You can select a method to configure a wireless adapter from the following:
Wizard Setup through
USB connection
Advanced Setup through
Ethernet connection
Operator Panel or Dell Printer Configuration Web Tool
WPS-PIN*
1
WPS-PBC*
2
USB connection
*
1
WPS-PIN (Wi-Fi
®
Protected setup-Personal Identification Number) is a method to authenticate and register devices
required for wireless configuration, by entering PIN assignments in the printer and computer. This setting, performed
through access point, is available only when the access points of your wireless router supports WPS.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
