Back to Contents Page
Understanding the Tool Box Menus
The Tool Box allows you to diagnose the printer settings.
NOTE: A Password dialog box appears the first time you try to change settings on Tool Box when Panel Lock is
set on the printer. In this case, input the password you specified, and click OK to apply the settings.
NOTE: For how to start Tool Box, see "Understanding Your Printer Software."
Chart Print
Purpose:
To output various charts that can be used for the printer's diagnosis.
Values:
Pitch
Configuration
Chart
Clicking Pitch Configuration Chart button outputs full halftone pages for yellow, magenta, cyan,
and black. Also outputs pages to check the pitch. The output report contains five pages and the paper
size is A4 or Letter.
Ghost
Configuration
Chart
Clicking Ghost Configuration Chart button outputs a chart to check for ghost printing. The output
report contains one page and the paper size is A4 or Letter.
4 Colors
Configuration
Chart
Clicking 4 Colors Configuration Chart button outputs bands of yellow, magenta, cyan, and black
with varying density. The output report contains one page and the paper size is A4 or Letter.
MQ Chart
Clicking MQ Chart button outputs a chart to confirm the banding. The output report contains two
pages and the paper size is A4 or Letter.
Alignment
Chart
Clicking Alignment Chart button outputs a chart to check for proper alignment of the print image on
the paper. The output report contains one page and the paper size is A4 or Letter.
Drum Refresh
Configuration
Chart
Clicking Drum Refresh Configuration Chart button outputs a chart to check the light fatigue of the
drum cartridge. The output report contains one page and the paper size is A4 or Letter.
Environment Sensor Info
Purpose:
To output the printer's internal environment sensor information to Result by pressing the Get Environment Sensor
Info button.
Back to Contents Page
To Next Page
Loading...
Need help?
General
Weight and Dimensions
