Back to Contents Page
Loading Print Media
Capacity
Print Media Dimensions
Loading Print Media in Standard and Optional Trays
Loading Print Media in the MPF
Linking Trays
Using the Duplex Function
Using the Center Output Tray
Using the Stacker Tray
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading print media, identify the recommended print side of the print media. This information is usually on the
print media package.
NOTE: After loading paper in the tray, specify the same paper type on the operator panel.
Capacity
The tray 1 can hold:
550 sheets of standard paper.
The optional 550-sheet feeder can hold:
550 sheets of standard paper.
The optional 1100-sheet feeder can hold:
1100 sheets of standard paper.
The MPF can hold:
150 sheet of the standard paper.
Print Media Dimensions
The standard and optional trays accept print media within the following dimensions:
Width - 98.4 mm (Monarch) to 215.9 mm (8.5 inches)
Length - 190.5 mm (Monarch) to 355.6 mm (14.00 inches)
The MPF accepts print media within the following dimensions:
Width - 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches)
Length - 127 mm (5.00 inches) to 355.6 mm (14.00 inches)
Loading Print Media in Standard and Optional Trays