Specifies trapping settings.
Available trapping option values are as follows:
0
Off
1
On
-Hld=PrintType:UserID:Password:DocumentName
Secure Print
PrintType
secure
Secure Print
private
Private MailBox Print
public
Public MailBox Print
proof
Proof Print
UserID
Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon).
Password
Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters).
DocumentName
Up to 12 single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A ":" (colon).
Secure Print
-Hld=store:UserID:Password:DocumentName
-Hld=store:UserID:Password:
Private MailBox Print
-Hld=private:UserID:Password:DocumentName
-Hld=private:UserID:Password:
Public MailBox Print
-Hld=public:UserID::DocumentName
-Hld=public:UserID::
Proof Print
-Hld=proof:UserID::DocumentName
-Hld=proof:UserID::
NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not
be available if you specify it when data need to be printed through another server or data need to be handled by
another program such as PostScript files. Collate is automatically specified when you specify Proof Print.
-Jown= jobownername: Password: jobgroupname Authentication Setting
Specifies job owner name, password, and job group name for authentication.
When only job owner name is specified (-Jown=jobownername:) (no password specified),
authentication password is treated as not specified.
When only password is specified (-Jown=:password) (no job owner name specified), login user name
is used as job owner name. Entered password is used as authentication password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
