When you use XPS driver, click the Option tab, and then ensure that Enable
Bi-Directional Communication check box is checked. If not, check the
check box.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
Windows Server 2008/Server
2008 x64
1. Click Start® Control Panel® Printers.
2. Right-click the printer and select Properties.
3. When you use PCL driver, click the Options tab, and then select Get
Information from Printer.
When you use XPS driver, click the Option tab, and then ensure that Enable
Bi-Directional Communication check box is checked. If not, check the
check box.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
Windows XP/XP x64/Windows
Server 2003/Windows Server
2003 x64
1. Click Start® Printers and Faxes.
2. Right-click the printer and select Properties.
3. When you use PCL driver, click the Options tab, and then select Get
Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers and Faxes dialog box.
Windows 2000
1. Click Start® Settings® Printers.
2. Right-click the printer and select Properties.
3. When you use PCL driver, click the Options tab, and then select Get
Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these steps:
1. When you use PCL driver, click the Options tab, and then select the total amount of the installed printer memory
for the memory capacity setting in the
Items list box.
When you use XPS driver, click the Option tab, and then remove the check mark from Enable Bi-Directional
Communication check box.
Select the total amount of the installed printer memory for the memory capacity setting in the Items list box.
2. Click Apply, and then click OK.
3. Close the displayed active dialog box.
When Using PS Driver
Windows
7/Windows 7
x64/Server 2008 R2 x64
1. Click Start® Devices and Printers.
2. Right-click the printer that uses the PS driver, and then select Printer
properties from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the memory capacity on the
Installable Options.
6. Close the Devices and Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select memory size from Memory
Capacity under Installable Options.
2. Click Apply, and then click OK.
3. Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1. Click Start® Control Panel® Hardware and Sound® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
