Maintenance
Clearing the Setting and Restoring Setting to Factory Default
Cleaning Your Printer
Maintaining the Toner Cartridge
Replacement parts
Ordering Supplies
Clearing the Setting and Restoring Setting to Factory Default
To restore the printer's factory default settings:
1. Press Menu ( ).
2. Press Scroll ( to ) to highlight Settings and press Select ( ).
3. Press Scroll ( to ) to highlight Factory Defaults and press Select ( ).
4. Press Scroll ( to ) to highlight Restore Now and press Select ( ).
5. Press Cancel ( ) to return to Standby mode.
Clearing the printer NVRAM
To selectively clear information stored in your printer's memory:
1. Press Menu ( ).
2. Press Scroll ( to ) to highlight Maintenance and press Select ( ).
3. Press Scroll ( to ) to highlight Clear Settings and press Select ( ).
4. Press Scroll ( to ) until you see the item you want to clear.
l All Settings: clears all of the data stored in memory and resets all settings to factory default.
l Paper Setup: restores all the Paper Setting options to factory default.
5. Press Select ( ). The selected memory is cleared and the display asks you to continue clearing the next item.
6. Repeat steps 4 and 5 to clear another item.
OR
Press Cancel ( ) to return to Standby mode.
Cleaning Your Printer
During the printing process, paper, toner, and dust particles accumulate inside the printer. This buildup causes print quality problems, such as toner specks or
smearing. Your printer has a cleaning mode that corrects and prevents these types of problems.
Cleaning the Exterior
Clean the printer cabinet with a soft, damp, lint-free cloth. Do not let water drip onto or inside the printer.
Cleaning the Interior
Paper, toner, and dust particles accumulate inside the printer and cause print quality problems, such as smearing or toner specks. Clean inside the printer to
prevent these problems.
To Next Page
Loading...
Need help?
General