Dell EMC PowerEdge R6525 User Manual

Figure 100. Removing the IDSDM module
Next steps
1. Replace the IDSDM module.
Installing the IDSDM module
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Locate the IDSDM connector on the system board.
To locate IDSDM module, see the System board jumpers and connectors section.
2. Align IDSDM module with the connector on the system board.
3. Press the IDSDM module until it is firmly seated in the connector on the system board.
116
Installing and removing system components

Dell EMC PowerEdge R6525 Specifications

General

Brand	Dell
Model	EMC PowerEdge R6525
Category	Server
Language	English