EasyManuals Logo

Dell Latitude D630 User Manual

Dell Latitude D630
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Adding and Replacing Parts 111
Hinge Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the
hinge cover.
1
Follow the procedures in "Before You Begin" on page 109.
2
Turn the computer top-side up, and then open the display all the way (180 degrees) so that the display
rests on your work surface.
NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously. Removing the
hinge cover in a different way than described may cause the plastic to break.
3
Starting on the right side of the computer, use a plastic scribe to pry up the hinge cover. Lift the cover
away from the computer going from the right toward the left, and lay the cover aside.
4
To replace the hinge cover, insert the left edge of the cover into place.
5
Press from left to right until the cover snaps into place.
Keyboard
CAUTION: Before performing the following procedures, follow the safety instructions in your Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1 hinge cover 2 plastic scribe 3 indent
1
2
3

Table of Contents

Other manuals for Dell Latitude D630

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell Latitude D630 and is the answer not in the manual?

Dell Latitude D630 Specifications

General IconGeneral
Form factorClamshell
Product typeLaptop
Product colorBlack, Grey
Memory slots2x SO-DIMM
Internal memory2 GB
Memory clock speed667 MHz
Memory form factorSO-DIMM
Internal memory typeDDR2-SDRAM
Maximum internal memory4 GB
3DNo
AC adapter includedYes
Disc types supportedCD, DVD
Storage mediaHDD
Optical drive typeDVD Super Multi
Card reader integrated-
Total storage capacity80 GB
Number of HDDs installed1
Pixel pitch0.2373 x 0.2373 mm
Display diagonal14.1 \
Display brightness220 cd/m²
Display resolution1280 x 800 pixels
Native aspect ratio16:10
Maximum on-board graphics card memory- GB
On-board graphics card dynamic frequency (max)- MHz
Speaker power2 W
Wi-Fi standards802.11a, 802.11b, 802.11g
Ethernet LAN data rates10, 100, 1000 Mbit/s
Charging port typeDC-in jack
USB 2.0 ports quantity4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Pointing deviceTouchpad
Operating system installedWindows 7 Home Premium
Operating system architecture64-bit
AC adapter frequency50 - 60 Hz
AC adapter input voltage100 - 240 V
Operating shock143 G
Operating altitude-15.2 - 3048 m
Non-operating shock163 G
Operating vibration0.66 G
Non-operating altitude-15.2 - 10668 m
Non-operating vibration1.3 G
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)0 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesENERGY STAR
Tcase- °C
Bus typeFSB
SteppingM0
Tjunction100 °C
Processor cache2 MB
Processor cores2
Processor modelT7250
System bus rate- GT/s
Processor familyIntel® Core™2 Duo
Processor seriesIntel Core 2 Duo T7000 Series
Processor socketSocket 478
Processor codenameMerom
Processing Die size143 mm²
Processor frequency2 GHz
Processor cache typeL2
Configurable TDP-down- W
Processor lithography65 nm
Processor manufacturerIntel
Processor front side bus800 MHz
Thermal Design Power (TDP)35 W
CPU multiplier (bus/core ratio)10
Number of Processing Die Transistors291 M
Processor codeSLA49
Processor ARK ID31728
Processor package size35 x 35 mm
Graphics & IMC lithography- nm
Weight and Dimensions IconWeight and Dimensions
Depth238 mm
Width337 mm
Height32.3 mm
Weight2270 g

Related product manuals