Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 25. Screw list
Component Screw type Quantity Screw image
Base cover M2x4 5
Base cover Captive screws 2
Battery M2x3 5
M.2 2280 solid-state drive +
M.2 thermal shield
M2x3 1
M.2 2230 mounting bracket +
M.2 thermal shield
M2x3 1
M.2 2230 solid-state drive +
M.2 mounting bracket
M2x2 1
Left fan M2x5 2
Right fan M2x5 2
Wireless-card bracket M2x3 1
Power-button board M2x3 1
Power-button with optional
fingerprint reader
M2x3 1
Type-C port bracket M2x4 2
Display assembly M2.5x5.5 4
System board M2x2 3
Touchpad M2x2 4
Touchpad M1.6x2.5 5
34 Working inside your computer
To Next Page
Loading...
Need help?
General
