d. display bezel
e. display assembly
f. display hinge cover
g. WWAN card(optional)
h. WLAN
i. battery
j. base cover
3. Follow the procedure in After working inside your computer.
Camera
Removing camera
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. WWAN card (optional)
d. WLAN card
e. display hinge cover
f. display assembly
g. display bezel
h. display panel
3. To remove the camera:
a. Disconnect the camera cable from the connector [1].
b. Lift the camera away from the display [2].
NOTE: The following procedure is applicable only if your computer is a non-touch computer.
Removing and installing components 55