Name: Dell PowerEdge
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

• PowerEdge M640p

• PowerEdge FC640

Supported physical disks

The PERC S140 controller supports the following physical disk types:

• SATA hard disk drive (HDD)

• SATA solid state drive (SSD)

• NVMe PCIe SSDs including NVMe PCIe SSD 2.5 - inch small form factor and NVMe PCIe SSD adapter.

NOTE: Only Dell - complaint NVMe PCIe SSDs are supported. For information on PowerEdge NVMe 2.5 - inch SFF and

PowerEdge NVMe PCIe SSD adapter, see the Express Flash NVMe PCIe SSD user's guide at dell.com/manuals.

NOTE: Mixing drives of dierent speeds (7,200 rpm, 10,000 rpm, or 15,000 rpm) and bandwidth (3 Gbps or 6 Gbps) while

maintaining the same drive type (SATA) and technology (HDD or SSD) is supported.

NOTE: Mixing NVMe PCIe SSDs and SATA drives is not supported in a single RAID virtual disk.

Management applications for the PERC S140

Management applications enable you to manage and congure the RAID subsystem, create and manage multiple disk groups, control and

monitor multiple RAID systems, and provide online maintenance. Management applications for PERC S140 include:

• BIOS Conguration Utility — This is also known as Ctrl+R, and is a storage management application that congures and maintains

RAID disk groups and virtual disks. See BIOS Conguration Utility.

• Unied Extensible Firmware Interface (UEFI) RAID Conguration Utility. This storage management application is integrated into the

System BIOS, accessible through the F2 key. See UEFI RAID conguration utility. RAID congurations on NVMe PCIe SSDs are only

supported through the UEFI RAID conguration utility.

NOTE

: Ensure that the RAID mode is enabled for NVMe PCIe SSDs. See Setting the NVMe PCIe SSDs to RAID mode

• OpenManage Storage Management-This application enables you to perform controller and enclosure functions for all supported RAID

controllers and enclosures from a single graphical or command-line interface without using controller BIOS utilities. For more

information, see the OpenManage Storage Management User's Guide at dell.com/openmanagemanuals.

• Lifecycle Controller-This is a management application for PERC. For more information, see the Lifecycle Controller User’s Guide at

dell.com/esmmanuals.

• iDRAC

Overview

Dell PowerEdge User Manual

Other manuals for Dell PowerEdge