Name: Dell PowerEdge
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installing the drivers

The PowerEdge RAID Controller (PERC) S140 requires software drivers to operate with supported operating systems. Which drives to

install depends on the type of the system and the operating system installed.

NOTE: To check operating system compatibility, see dell.com/support/manuals

NOTE: If the operating system is installed on a PERC or BOSS device, ensure that the software RAID OS driver is installed using

the Dell Update Package (DUP) while SATA and NVMe are in RAID mode while in BIOS settings.

Topics:

• Pre-installation requirements

• Creating the device driver media for Windows driver installation

Pre-installation requirements

Before you install the operating system:

• Read the Microsoft Getting Started document that shipped with your Windows operating system.

• Ensure that your system has the latest BIOS, rmware, and driver updates. If required, download the latest BIOS, rmware, and driver

updates from dell.com/support.

• Create a device driver media (USB drive, CD, or DVD).

Setting the SATA controller to RAID mode

1 Turn on the system.

2 When the Dell Power-On Self-Test (POST) screen is displayed, press F2.

3 When the Dell PowerEdge System window is displayed, scroll to SATA Settings and press Enter.

In the sub-screen, conrm that the SATA Controller is set to a RAID mode.

NOTE

: If necessary, use the space bar to change the setting.

4 Press Esc to exit.

5 Press Esc again.

Setting the NVMe PCIe SSDs to RAID mode

WARNING

: Changing mode to RAID mode will cause a data loss in the NVMe PCIe SSD.

NOTE: Ensure SATA settings is on RAID mode.

1 Turn on the system.

2 When the Dell Power-On Self-Test (POST) screen is displayed, press F2.

3 When the System Setup window is displayed, click System BIOS.

40 Installing the drivers

Dell PowerEdge User Manual

Other manuals for Dell PowerEdge