Dell W32C User Manual

Steps
1. Place and align the I/O bracket with the display-assembly base.
2. Align the I/O slots to the I/O ports and the screw holes on the I/O bracket with the screw holes on the display-assembly
base.
3. Replace the three screws (M3x5) that secure the I/O cover to the display-assembly base.
Next steps
1. Install the bottom cover.
2. Install the I/O cover.
3. Install the system-board shield.
4. Install the back cover.
5. Install the stand.
6. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the back cover.
4. Remove the system-board shield.
5. Remove the I/O cover.
6. Remove the bottom cover.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
Removal and installation procedures for Energy Efficient processors
133

Dell W32C Specifications

General

Brand	Dell
Model	W32C
Category	Desktop
Language	English