InfraSuite EnviroStation 13
ARNING:
Under no circumstance should you connect the EnviroProbe’s Input port to
another one’s Input port. This may cause unrecoverable malfunction to your
EnviroProbes. Please be careful and always make sure that you are
connecting the correct ports before you plug in.
3.4. Digital Input
The EnviroStation provides four Digital Inputs. Wet and Dry Contacts can be
connected for applications such as smoke, fire and door security detection. To
connect your peripheral devices, please refer to the following figures for terminal
connections:
Digital Value Dry Contact Wet Contact
1
Close 5~24Vdc
0
Open < 1.5Vdc