Chapter 5 : InsightPower SNMP IPv6 for EnviroStation Web
62
Batch Configuration
The EnviroStation provides batch configuration to allow quick and effortless
setup on multiple EnviroStations and SNMP devices. You can duplicate settings
by exporting configuration files from the devices that you have successfully
configured, and import the configuration files on other devices.
System Configuration
The System Configuration includes settings saved in the Management and
Administration tabs. To download a configuration file, simply click Download.
To upload a configuration file, click Choose File, select the file you wish to
upload, and click Upload.
NOTE:
If the IP address is static and you wish to copy settings to other devices
on the same LAN, you must manually remove the following line
IP=xxx.xxx.xxx.xxx under the [System] section from the exported
configuration file. You can open the configuration file with text editors
such as Notepad and WordPad. (To modify/ assign IP address for the
EnviroStation, please see Chapter 4: System Configurations).
To Next Page
Loading...
Need help?
General
