InfraSuite EnviroStation 65
SNMPv3 USM
SNMPv3 offers features such as the encryption of packets and authentication to
improve security. The SNMPv3 USM (User Session Management) allows you to
assign eight User Names whose access is granted via SNMPv3 protocol. You
can also define their respective Security Levels, Auth Passwords, Priv
Passwords and Access Level.
SNMP Trap
SNMP Trap alerts users to event occurrences in your monitored environment. To
enable SNMP Trap, you must add Target IP addresses to the Target IP list.
Specify the Community String, Trap Type, Event Level, SNMPv3 User Name and
UDP Port, then click Add.
You can determine what event notifications should be sent to the Target IP(s)
from Event Level. Three Event Levels are listed as follows: