Delta EnviroStation EMS2000 User Manual

Chapter 5 : InsightPower SNMP IPv6 for EnviroStation Web
46
 For EnviroProbe 1100 (EMS1100)
The EnviroProbe 1100 (EMS1100) provides four digital outputs. In this page,
select an ID first and then set up Title and Type. Click Enable if you wish to
enable the device. Please note that the ID means the ID No. you set up for
your EnviroProbe 1100 (EMS1100) using its ID DIP switches (please see 3.3
EnviroProbe). You can set up each digital output’s Operation, Period and
Title. Select Automatic to enable automatic linking between a specific digital
output and Reaction (please see 5.2.1 Management - Reaction). Select
Manual to set the specific digital output status by clicking the Normal and
Alarm buttons.
The digital output changes its status during the period of time specified in the
Period box. The original digital status resumes after the given duration. If the
specified Period is 0, the original digital status does not resume automatically
unless you manually click the Normal button or set up Reaction (please see
5.2.1 Management - Reaction).

Delta EnviroStation EMS2000 Specifications

General

Brand	Delta
Model	EnviroStation EMS2000
Category	Control Unit
Language	English