Delta M60U User Manual

Figure 4-18: DC AFCI Display screen
AFCI (Arc Fault Circuit Interrupter) is an advanced circuit breaker that breaks
the circuit when it detects a dangerous electric arc in the circuit it protects to
prevent electrical fires. The default setting of AFCI is “ON”.
4.3.7.10 DC Arc Fault Circuit Interrupter (AFCI)
AFCI
Return to Factory
►
ON
User can confirm grid code parameters as following, such as voltage and frequency
protection parameters.
More detail of F/VRT will be show in appendix.(For HECO and Rule 21).
4.3.7.11 Grid code confirm
Figure 4-19: Grid Code Confirm screens
S/N: RN11179CB0
Install: 01/01/2016
INV ID: 1
►
EPO Normal Open
Grid Settings
Active Pwr Settings
React Pwr Settings
►
Meter
Energy Log
Event Log
Inverter Info.
EXIT
ENT
Country:
Insulation:
Baud Rate:
HECO A
100k
19200bps
FW Version
DSP:
COM:
SCM:
1.30
91.05
1.35
RED:
ARC:
61.06
1.05
AC connection:
Max. Power:
Dry Cont A:
Dry Cont B:
3P3W
83000W
Disable
Disable
76
Commissioning

Delta M60U Specifications

General

Brand	Delta
Model	M60U
Category	Inverter
Language	English