Delta VFD185B43A User Manual

Chapter 5 Parameters_VFD-B Series
Revision 10/2005, BE13, SW V4.08 5-47
Group 3: Output Function Parameters
03 - 00
Multi-function Output Relay (RA1, RB1, RC1)
Factory Setting: 08
03 – 01
Multi-function Output Terminal MO1
Factory Setting: 01
03 - 02
Multi-function Output Terminal MO2
Factory Setting: 02
03 - 03
Multi-function Output Terminal MO3
Factory Setting: 20
Settings Function Description
00 No Function
01 AC Drive Operational
Active when there is an output from the drive or RUN command is
“ON”.
02 Master Frequency Attained
Active when the AC motor drive reaches the output frequency
setting.
03 Zero Speed
Active when Command Frequency is lower than the Minimum
Output Frequency.
04 Over-Torque Detection
Active as long as over-torque is detected. (Refer to Pr.06-03 ~
Pr.06-05)
05 Baseblock (B.B.) Indication
Active when the output of the AC motor drive is shut off during
baseblock. Base block can be forced by Multi-function input (setting
9 or 10).
06 Low-Voltage Indication Active when low voltage(Lv) is detected.
07 Operation Mode Indication Active when operation command is controlled by external terminal.
08 Fault Indication
Active when faults occur (oc, ov, oH, oL, oL1, EF, cF3, HPF, ocA,
ocd, ocn, GFF).
09 Desired Frequency Attained 1 Active when the desired frequency (Pr.03-04) is attained.
10 PLC Program Running Active when PLC Program is running.
11 PLC Program Step Completed Active for 0.5 sec each time the multi-step speed is attained.

Delta VFD185B43A Specifications

General

Brand	Delta
Model	VFD185B43A
Category	DC Drives
Language	English